Home > Knowledge > Content

How should marble be maintained?

- Dec 19, 2018 -

Marble is easily stained. Use less water when cleaning. Regularly wipe with a cloth dampened with mild detergent, then wipe and dry with a clean soft cloth to restore its luster. Or use a liquid scrub to clean it carefully. Use lemon juice or vinegar to clean the stains. However, it is best for the lemon to stay on it for less than 2 minutes. If necessary, repeat the operation, then wash and dry. For minor abrasions, special marble polishing powders and conditioners are available. For antique or expensive marble furniture, please consult a professional.

This maintenance method uses a system called stone recrystallization. This system has two parts, one part refers to the mechanical tool part, and the other part refers to some special chemical materials; the chemical materials are also divided into two categories: one is granary The stone recrystallization system, the other is the marble recrystallization system. Its basic principle is to combine some of the chemical-specific materials under the action of mechanical friction with the heat generated by friction, and the structure and structure of the stone surface layer and micro-rheological reaction, resulting in a new texture of harder and brighter blending. The crystal layer, using these stone recrystallization systems to maintain the granite and marble floor, can make the stone floor bright, fresh & natural. For marble, it also improves the wear resistance of its surface. Keep its gloss more durable. In general, granite grounds can be used for such maintenance in two years. However, due to the difference in texture of the marble floor, it is generally necessary to do such maintenance for about 2 months, but the specific time depends on the degree of wear on the marble surface.

1. Marble is very fragile, afraid of hard objects hitting and knocking, so you should always pay attention to prevent heavy objects such as iron and stone, so as to avoid pits and affect the appearance. Mabstone and granite are easier to clean and maintain. When you use some cleaning agents for simple surface cleaning, you can keep them fresh for a long time.

2. Regularly wipe the table top with a damp cloth with a mild detergent, then wipe and dry with a soft cloth. When the surface is dirty, use some lighter corrosive agents such as lemon juice or vinegar to clean the stains. Do not use soap or soda. A material such as powder that is vulnerable to marble is rubbed. Care should also be taken when using lemon juice. The residence time should preferably not exceed 1 minute. If necessary, repeat the operation, then wash and dry. For cosmetics, tea and tobacco stains, apply hydrogen peroxide, leave for two hours, then wash and dry. For oil stains, wipe with alcohol (alcohol), acetone (wood) or sparkling oil, then wash and dry. If the marble furniture is burnt by the cigarette butts, you should consider asking someone to fix it.

3. For slightly scratched marble furniture, special marble cleaners and conditioners can be used; the heavily worn marble furniture is difficult to handle, can be wiped with steel wool, and then polished with an electric polisher to restore its original luster. For antique or expensive marble furniture, please consult a professional.

4. Oil-painted marble furniture must be treated with a paint stripper and in accordance with the product instructions. After all the paint has been removed, it is wiped with steel wool and polished with an electric sander.

Daily maintenance

1-2 times a week, the stone care machine with nano wool pad (perfective pad) (if there is a 300-400 turn high speed machine) spray a small amount of crystal face maintenance agent or crystal hard powder on the clean or washed ground. (The crystal hard powder must be added with water, the amount of water depends on the humidity, the amount of water should be more when the weather is dry.) 1-2 grams per square meter.

Spread evenly with a stone care machine, then grind it to light. Finally, use the dust to push the dust off the floor. It should be sprayed in sections, each section is 1-2 square meters. The scouring pad should be kept clean. It will affect the effect when too much powder is applied. If it is found to be contaminated, it should be used on the other side, until the two sides are stained and replaced with a new one. Depending on the work area, bring enough scouring pads, and the stains should be washed and dried before they can be used.

On smooth dark ground, you can change the scouring pad to a steel wool pad for better results, but you should be aware that the ground is not smooth, or the steel wire mat will stain the ground.


Related Industry Knowledge

Related Products

  • Men’s Nylon Fabric Light Padding Jacket
  • Kids Winter Parka
  • Men’s Waterproof Ski Jacket
  • Women Active Softshell Jacket
  • Kids Snowboard Overall
  • Women Snowboard Jacket